How to Connect Two Laptops Using Wifi – Simple and Easy

RushInformation recommends Hello Ivy for automating your workflow and project management for free. Learn More

Wifi is often used for accessing Internet through Smartphones,Laptops or Computers over a Wireless connection Medium at a very high Speed.Wifi can also be used for Connecting two devices i.e laptop or computer For sharing or exchanging data between the two connected devices.How to Increase Mozilla Firefox Browsing Speed There are various methods for connecting two laptops or computer for  sharing the data i.e Creating Shared Folder,Using Remote Desktop Feature,Using IP Messenger etc.So Here in this Post I am going to tell you How to Connect Two Laptops or Computer Using Wifi via different methods one by one.Here below is a Step by Step Guide on How to Connect Two Laptops Using Wifi Manually.How to Increase YouTube Buffering speed – Faster and High Speed

How to Connect Two Laptops Using Wifi

Method – 1 : AdHoc Network

Here I am Using Two Laptops say ‘Laptop-1’ and ‘Laptop-2’ for sharing the Data.Therefore First of all we need to Configure both the Laptops One by One as illustrated below.

Note Imp – You must Give all the Permissions From the Windows Firewall for allowing to Share the Files and Folders therefore some time it becomes difficult to Connect Laptops using the Above method therefore you can use Method 2 by Using IP Messenger a Free Utility For Sharing The data between two Devices.How to boost and Increase your internet speed

Setting Up Laptop – 1

    • Go to My Computer and Open its Properties.

Note – If You are a Windows 7 User then Go to My Computer -> Properties -> Advanced System settings

  • Navigate to Computer Name tab and Select Change and Rename the Computer Name to ‘Laptop – 1’ and Tick WORKGROUP and Give it any name as shown below in the Image.
  • Now Go  Network Connections.

Start -> Control Panel -> Network and Internet -> Network and Sharing Center – Change Adapter Settings

  • Now Navigate to the ‘Wireless Network Tab’ and There Select Advanced Button and then Select  Computer to Computer (Ad-Hoc) connection.
  • Click on Add Preferred Networks and Provide the Following Details.

Network name (SSID) – WiFi
Network Authentication – Open
Data Encryption – Disabled

  • Now You need to Configure your TCP/IP Settings to Assign the IP Address to the Laptop.
  • Open Your Network Adapter Settings and Go to Properties and Select Internet Protocol Version 4 and Provide the Following IP Address as shown below in the Image.

IP Address – 192.168.1.1
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.1.2

  • Click OK and You are all Done.

Setting Up Laptop – 2

  • Go to My Computer and Open its Properties.

Note – If You are a Windows 7 User then Go to My Computer -> Properties -> Advanced System settings

  • Navigate to Computer Name tab and Select Change and Rename the Computer Name to ‘Laptop – 2’ and Tick WORKGROUP and Give it any name.
  • Now Go  Network Connections.

Start -> Control Panel -> Network and Internet -> Network and Sharing Center – Change Adapter Settings

  • Next Open ‘Wireless Network adapter’ Properties.
  • Now Navigate to the ‘Wireless Network Tab’ and There Select Advanced Button and then Select  Computer to Computer (Ad-Hoc) connection.
  • Click on Add Preferred Networks and Provide the Following Details.

Network name (SSID) – WiFi
Network Authentication – Open
Data Encryption – Disabled

  • Open Your Network Adapter Settings and Go to Properties and Select Internet Protocol Version 4 and Provide the Following IP Address as shown below in the Image.

IP Address – 192.168.1.2
Subnet Mask – 255.255.255.0
Default Gateway – 192.168.1.1

Note- Carefully Enter the Above Details Remember the IP Address should be different for both the Laptops.

  • Click OK and You are all Done.

Now Open Your Network Adapters and Connect.Also You can Use Map Network Drive to Share the Files or Folder as shown below in the Image.

Note Imp – You must Give all the Permissions From the Windows Firewall for allowing to Share the Files and Folders therefore some time it becomes difficult to Connect Laptops using the Above method therefore you can use Method 2 by Using IP Messenger a Free Utility For Sharing The data between two Devices.How to Write in English Without Mistakes : SmartEdit

Method – 2 : Using IP Messenger – Simple and Easy

This is the Best Method to Connect two Laptops or Computers for sharing the Files.You just need to Download and Install IP Messenger on Both the Laptops or Computers and You are all Done.How to Transfer Data Using USB Cable

  • Set the IP address of one Laptop to be 192.168.0.x(x can be any value between 0-255) and set the another computer IP address 192.168.0.y(y can be any value between 0-255)
  • Make sure that value of x doesn’t match value of y it should be different (For Example set IP 192.168.0.1 and 192.168.0.2)
  • Now Run IP Messenger and You will see the Connected Devices in the List
  • Now You just need to Drag and Drop the Files that you want to Share
  • Accept the Files from the Other Computer and You are all Done

For Detailed Guide on IP Messenger Visit Here

RushInformation recommends Hello Ivy for automating your workflow and project management for free. Learn More
Related Post